Micromeritics AccuPyc II 1340 - Page 55

AccuPyc II 1340 System Commands
Aug 2013 3-21
Baud rate specifies the rate at which data are transmitted via
the RS232 port.
Choices: 9600 600
110 1200
150 4800
300 19200
Press
CHOICE until the desired value is displayed, then
press
ENTER.
Press
CHOICE to select 8 or 7, then press ENTER.
Press
CHOICE to select 1 or 2, then press ENTER.
Press
CHOICE until the desired option is displayed, then
press
ENTER.
Choices: None, Even, Odd
This prompt enables you to use the Xon/Xoff protocol for
transmitting data.
Press
CHOICE to select Disabled or Enabled, then press
ENTER.
Unit[n] SN1234 10 cm3
Communications
Baud Rate?
9600
Unit[n] SN1234 10 cm3
Communications
Data Bits?
8
Unit[n] SN1234 10 cm3
Communications
Stop Bits?
1
Unit[n] SN1234 10 cm3
Communications
Parity?
None
Unit[n] SN1234 10 cm3
Communications
Xon / Xoff Protocol?
Disabled