Programming events 205
PRO1 Live Audio System
Operator Manual
Next Opens the next scene on the PRO1. This scene is the same
one that would be opened if you pressed the next button.
Now Opens the ‘now’ scene on the PRO1. This scene is the
same one that would be opened if you pressed the now
button.
Note Off Informs the instrument to stop playing a note at a specified
pitch and velocity.
Parameters for Note Off are notes A0 to C7, with each
having a possible velocity of between 0 and 127. You can
also choose between Enable MIDI Byte 1 and Enable
MIDI Byte 2.
Note On Informs the instrument to start playing a note at a
specified pitch and velocity.
Parameters for Note On are notes A0 to C7, with each
having a possible velocity of between 0 and 127. You can
also choose between Enable MIDI Byte 1 and Enable
MIDI Byte 2.
Notes Event Using this option, you can displays notes that may be
useful at a certain point in the scene.
Pitch Wheel Use the pitch wheel to trigger the event. The pitch wheel is
a wheel type device, normally found to the left of a
synthesizer keyboard, that manipulates the pitch of a
played note(s).
Pressure Pressure applied to the key that is being pressed. This
affects, for example, the vibrato of the note being played.
Parameters are between 0 and 127. You can also choose
between Enable MIDI Byte 1 and Enable MIDI Byte 2.
Program n One of the 128 programs.
Program Change Changes the device to a particular patch/voice/preset etc.
Parameter are 0 to 127. You can also choose between
Enable MIDI Byte 1 and Enable MIDI Byte 2.
Scene Entry Triggers the event when a scene is opened.
Scene Exit Triggers the event when a scene is closed.
Scene Recall Triggers the event when the ‘now’ scene is reloaded, but
not jogged to.
Scene Entry And Exit Triggers the event when a scene is opened or closed.
Scene Entry And
Recall
Triggers the event when a scene is opened or the ‘now’
scene is reloaded (but not jogged to).
Scene Entry, Exit
And Recall
Triggers the event when a scene is opened, closed or the
‘now’ scene is reloaded (but not jogged to).
Static High External device is closed/switched off.
Static Low External device is opened/switched on.
X-Fade Event Lets you configure the crossfade event.
Parameter Description
To Next Page
Loading...
Need help?
General