Maintenance
113
Periodic checks
The machine should be serviced every 1000 hours of operation, or
at least once a year by Miele Service.
This maintenance will cover the following:
– Electrical safety according to national regulations (VDE 0701/0702
in Germany)
– Door mechanism and door seal
– Any screw connections and connectors in the wash cabinet
– Water inlet and drainage
– Internal and external dispensing systems
– Spray arms
– Filter combination
– Sump including drain pump and non-return valve
– All mobile units, baskets, modules and inserts
– Steam condenser
– Wash pressure sensor
– Drying unit
– Conductivity meter
If there is a communication module:
– Any printer connected to the machine
– Network connection
External documentation software and the computer network will
not be tested by Miele.
The following operational tests will be carried out within the
framework of the maintenance:
– A programme will be run as a test run
– Thermo-electrical measurements will be taken
– Seals will be tested for water tightness
– All relevant measuring systems will be safety tested including error
message displays
– Safety features
To Next Page
Loading...
