Water softener
32
Filling the salt reservoir
Use only special, coarse-grained reactivation salt with a granule size
of approx. 1 - 4 mm.
Do not under any circumstances use other types of salt such as table
salt, agricultural or gritting salt. These may contain insoluble additives
which can impair the functioning of the water softener.
Inadvertently filling the salt reservoir with cleaning agent will
cause serious damage to the water softener.
Before filling the salt container make sure that you have picked up
the right packet of reactivation salt.
Open the door to an angle of approx. 45°. This ensures that the salt
flows into the reservoir more easily.
Press the yellow button on the salt reservoir with the symbol on
it in the direction of the arrow. The flap will spring open.
Lift up the funnel.
The reservoir takes approx. 1.4 - 2 kg of salt, depending on the type
of salt and how much is left in.
To Next Page
Loading...
