Further settings
91
Test programme
Various programmes are available for monitoring cleaning
performance in routine testing.
See "Maintenance" for more information on these programmes.
Interface
With Miele washer-disinfectors, cleaning processes can be
documented. To enable this, Miele washer-disinfectors are equipped
with a module slot on the back to take a Miele communication
module. The communication module is available from Miele and
comes with its own operating instructions.
Only use terminal devices (PC, printers etc.) which comply with EN/
IEC 60950.
Contact Miele for more information about communication modules,
software, suitable printers and the Miele Remote Service.
Ethernet
The XKM 3000 L Med communication module enables the
establishment of an Ethernet interface for digital archiving of process
data via external software.
The module can be connected to a WLAN network via an existing
wireless access point.
RS232
A XKM RS232 10 Med communication module is required for direct
connection to a report printer.
The XKM RS232 10 Med can also be used for connection to a
terminal or terminal emulator. The data is transmitted in ASCII code.
To Next Page
Loading...
