Programme chart
156
Programme Use
Pre-wash
1 2 3
(Free memory)
Programmable programme for special applications;
programming by arrangement with Miele Service.
(Free memory)
Programmable programme for special applications;
programming by arrangement with Miele Service.
Vario TD Inst 4trays
Cleaning and disinfecting programme, compliant
with ENISO15883, for reprocessing instruments
without hollow sections / lumen in A 202 mobile
unit for 4 DIN mesh trays.
CW
1Min
Vario TD Inst 6trays
Cleaning and disinfecting programme, compliant
with ENISO15883, for reprocessing instruments
without hollow sections / lumen in mobile unit/
basket combinations for 6 A 202 and A 103 mesh
tray.
CW
1Min
Vario TD MIS
Special cleaning and disinfecting programme,
compliant with ENISO15883, for processing
instruments from minimal invasive surgery (MIS).
CW
1Min
Vario TD Instr 8trays
Cleaning and disinfecting programme, compliant
with ENISO15883, for processing instruments
without hollow sections / lumen in 8 A 208 mesh
trays.
CW
1Min
Vario TD AN
Special cleaning and disinfecting programme with
higher water levels for processing
anaesthetic utensils. This programme is compliant
with EN ISO 15883 80°C (+5°C, -0°C) with a 10-
minute holding time for medical devices that come
into direct contact with the skin.
CW
1Min
Vario TD GYN
Special cleaning and disinfecting programme,
compliant with ENISO15883, for reprocessing
gynaecological instruments (GYN).
CW
1Min