EasyManua.ls Logo

Miele PG8582 CD - Technical Data

Miele PG8582 CD
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
162
Height with machine lid
Height without machine lid
835mm
820mm
Width 898mm
Depth
Depth with door open
598mm
1,200mm
Wash cabinet dimensions:
height
width
depth of upper basket/lower basket
520mm
530mm
474mm/520mm
Weight (net) 98kg
Max. load capacity of open door 37kg
Voltage, connected load, fuse rating See data plate
Mains cable Approx. 1.8m
Water temperature water connection:
Cold water / Steam condenser
Hot water / AD water
max. 20°C
max. 65°C (UK: max. 60°C)
Static water pressure Max. 1,000 kPa pressure
Minimum water intake flow pressure:
Cold water / steam condenser
Hot water
AD water
100kPa (UK: 200kPa) pressure
40kPa (UK: 200kPa) pressure
30kPa (UK: 200kPa) pressure
Recommended water intake flow pressure:
Cold water / hot water
AD water
Steam condenser
200kPa pressure
200kPa pressure
100kPa pressure
Delivery head min. 0.3m, max. 1.0m
Drainage length max. 4.0m
Operation:
Ambient temperature
Relative humidity maximum
linear decreasing to
5°C to 40°C
80% for temperatures up to 31°C
50% for temperatures up to 40°C
Storage and transportation conditions:
Ambient temperature
Relative humidity
Air pressure
- 20°C to 60°C
10% to 85%
500hPa to 1060hPa
Altitude above sea level to 1,500m*
Protection category (according to IEC 60529) IP20
Soiling level (according to IEC/EN 61010-1) 2
Overvoltage category (according to IEC 60664) II
Noise level in dB (A),
sound pressure LpA during cleaning and drying phases
<70
Test certificates VDE, EMC radio suppressed
mark MDD guidelines 93/42/EEC, Class IIb
Manufacturer's address Miele & Cie. KG, Carl-Miele-Straße 29,
33332 Gütersloh, Germany
* If installed above 1,500m the boiling point of water will be lower. In this case the disinfecting temperature and the
holding time will need to be reset by a Miele Service technician.

Table of Contents

Related product manuals