Miele PG8582 CD - Entering the Access Code Procedure

Further settings
82
Code
The Further settings menu incorporates relevant functions and system
settings which require an enhanced knowledge of machine
reprocessing. Access to the menu is therefore protected by a four
digit code.
 If a code is lost, a new code must be issued by Miele Service.
Enter code
When the Further settings menu is selected, you will be prompted to
enter the code.
PIN code
If you do not have the code, contact a user with appropriate
access rights or cancel the process using the  button.
 Use the arrow buttons  (higher) and  (lower) to enter the relevant
digits.
 Confirm each digit individually with the OK button.
When the OK button is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the  button
and repeated. Entered digits are replaced by a * symbol.
If all digits are entered correctly the menu will be released.
If an incorrect entry is made, an error message will appear.
Wrong code entered
 Confirm the message with OK.
Access remains blocked and the display reverts to the menu
selection.