Further settings
86
Log book
The entire life cycle of the machine, including consumption data for
water and chemical agents, as well as operating hours and
programme cycles are recorded in the log book.
Miele Service can also use the log to calculate a recommendation for
service intervals.
Open the menu as follows:
button
Further settings
Log book
– Consumption: Water
Display the total amount of water used in litres (l).
– Consumption: Detergent
Display the total amount of liquid cleaning agent used in litres (l).
– Consumption: Surfactant
Display the total amount of rinsing agent used in litres (l).
– Consumption: Neut. agent
Display the total amount of neutralising agent used in litres (l).
– Consumption: DOS 5
Display the total amount of liquid media that has been dispensed
via the DOS module connection for DOS 5 in litres (l).
– Operating hours
Display the total number of operating hours.
– Programme cycle counter
Total of all completed programmes. There is no breakdown of
individual programmes. Cancelled programmes are not included.
– Service interval
Date of the next service (entered by Miele Service).
Select an option using the and arrow buttons and save your
choice with OK.
Values in the machine log cannot be altered.
Press the button to exit the menu.
To Next Page
Loading...
