Miele PG8582 CD - Resetting the Operating Hours Counter

Maintenance
122
Resetting the
operating hours
counter
The maximum permissible number of operating hours is pre-set in the
controls for all filters. After a filter has been changed the operating
hours counter must be reset.
 Open the menu as follows:
 button
Settings 
Filter maintenance
 Coarse filter or HEPA filter
Filter life remaining
55 h
The remaining operating hours for this filter type are shown on the
display.
 Confirm the message with OK.
Then you will be asked if you wish to reset the operating hours
counter.
 The operating hours counter must only be reset when the filter
has been changed.
Reset
No
Yes
– Yes
The operating hours counter will be reset for the new filter.
– No
The counter will not be reset.
 Select an option using the  and  arrow buttons.
 Confirm your selection with OK.