Adding and dispensing chemical agents
55
Refill indicator
When the fill level is low in the (DOS 2) supply container for rinsing
agent you are reminded to refill it.
Confirm the message shown with OK and
refill the rinsing agent as described.
Dispensing
rinsing agent
The dispensing concentration is set by Miele Service.
– If there are spots of water left on items after reprocessing, then the
dispensing concentration is set too low.
– If clouding or smearing appears on items, the dispensing
concentration is set too high.
In either case contact Miele Service and have the dispensing
concentration reset.
To Next Page
Loading...
