Programme chart
160
Programme Use
Pre-wash
1 2 3
Universal
For laboratory glassware and utensils.
For removing organic residues and some inorganic
residues. For low to medium levels of soiling and
normal wash results.
Factory default spray arm monitoring only activated
for the two machine spray arms.
CW70
1Min
Special 93°C-10'
For cleaning and thermal disinfection at 93°C with
10minutes temperature holding time (exposure
time).
Rinsing
For flushing out saline solution (see "Water softener/
Adding salt") and rinsing heavily soiled loads, e.g. for
pre-rinsing soiling, residual disinfecting agent, or to
prevent items drying out and to prevent incrustation
before running a full load.
Drain
For draining wash water, e.g. after a programme
cancellation (see "Operation/Cancelling a
programme").
To Next Page
Loading...
