Miller Multimatic 220 - Installing Wire Spool and Adjusting Hub Tension

OM-281426 Page 28
F
Complete Parts List is available at www.MillerWelds.com
5-13. Installing Wire Spool And Adjusting Hub Tension

A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 17
2-10. Installing Wire Spool And Adjusting Hub Tension
Ref. 282721A / 803 012 / 803 013 -B / Ref. 802 444-C
2
1
Warning
1
2
3
OM-222 Page 1
allen_wrench
NGO’s
tools/
flathead philips head wrench
pliers
knife
heavy-duty workclamp light-duty workclamp wirecutter frontcutter
allen_set
needlenose
steelbrush nutdriver
chippinghammer
solderiron
stripcrimp
drill
torque wrench
socket wrench
hammer awl file
crimper
paintbrush
feelergauge flashlight ruler
toothbrush
greasegun
qtip (swab)
vicegrip
handream
punch
filterwrench
strapwrench
airgun
solvent pinextractor eprompuller pipewrench
torque screwdriver
crescent wrench
1/2 in.
1 Wire Spool
2 Retaining Nut—For 8 in. (203 mm) Spool
Only
Installing 4 in. (102 mm) Wire Spool
 A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 17
2-10. Installing Wire Spool And Adjusting Hub Tension
Ref. 282721A / 803 012 / 803 013 -B / Ref. 802 444-C
2
1
Warning
1
2
3
When a slight force is needed to turn spool,
tension is set.
Installing 8 in. (203 mm) Wire Spool
 A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 17
2-10. Installing Wire Spool And Adjusting Hub Tension
Ref. 282721A / 803 012 / 803 013 -B / Ref. 802 444-C
2
1
Warning
1
2
3
3 Adapter And Retaining Ring
4 Locking Hole In Spool
5 Locking Pin On Spool Hub
Align locking hole in spool with locking pin on
spool hub.
When a slight force is needed to turn spool,
tension is set.