Miller Multimatic 220 - Entering the Setup Menu

OM-281426 Page 37
F
Complete Parts List is available at www.MillerWelds.com
6-8. Entering Setup Menu
 A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 26
3-8. Entering Setup Menu
Ref. 281252A
1
2
3
4
1 Wire/Rod/Tungsten Minus (-) Button
2 Material Thickness Minus (-) Button
3 Material Thickness Plus (+) Button
4 Display
To enter the setup menu, simultaneously
press then release the Wire/Rod/Tungsten
Minus (-) button and Material Thickness
Plus (+) button. After entering the setup
menu, the Material Thickness light will flash.
To move to the next setup menu, press the
Material Thickness Plus (+) button.
To move to the previous setup menu, press
the Material Thickness Minus (-) button.
To exit the setup menu, simultaneously
press then release the Wire/Rod/ Tungsten
Minus (-) button and the Material Thickness
Plus (+) button.