Millipore Synergy - Chapter 5 Using the Synergy; Understanding the Display; How to Get Water from the Synergy; Using the Dispensing Button

USING THE SYNERGY
Chapter 5 USING THE SYNERGY
5-1 UNDERSTANDING THE DISPLAY
The Display is used to view information about the Operating Modes, the Operating Parameters and
Maintenance or Alarm messages.
Operating
Modes
Operating
Parameters
Maintenance
or Alarms
UV System only
5-2 HOW TO GET WATER FROM THE SYNERGY
USING THE DISPENSING BUTTON
There are two ways to get water using the Dispensing Button:
Press once and release. OR Press and hold down.
To stop dispensing water, press the
Dispensing Button once again.
To stop dispensing water, release the
Dispensing Button.
- 22 -