MAINTENANCE
6-2 HOW TO REPLACE THE SYNERGYPAK
Do not touch the UV Lamp when replacing the
SynergyPak.
HAZARD
!
A
B
C
R
EMOVING THE SYNERGYPAK
Open the front cover to go into STANDBY
mode. Press the Dispensing Button once. The
system will dispense water. Wait for the system
to depressurize. The Display will show
STANDBY blinking for 10 seconds.
Remove the Final Filter.
Press your thumbs on the system (A).
Swing the pack towards you (B).
Remove the pack from the system (C).
- 30 -
To Next Page
Loading...
