USING THE SYNERGY
5-3 OPERATING MODES
STANDBY
STANDBY mode is displayed when the front cover is
removed. The system will depressurize during which
STANDBY will be blinking on the Display for 10
seconds. All system operations are disabled.
STANDBY mode is selected before attempting
maintenance on the system.
P
RE OPERATE
PRE OPERATE mode is displayed when the system is
not dispensing water and not in Standby mode.
The system will have a 3-minute auto-recirculation
every 2 hours in PRE OPERATE mode. The Booster
Pump turns on. This will enhance the quality of the
Product Water delivered from the system.
Recirculation can also be activated manually for up
to 3 minutes.
The resistivity and temperature of the Product Water
is displayed during recirculation. The resistivity and
temperature remain displayed for up to 10 seconds
after recirculation is finished.
- 25 -
To Next Page
Loading...
