Millipore Synergy - Chapter 4: Installation; System Preparation; Tubing Connection

INTRODUCTION
Chapter 1 INTRODUCTION
1-1 USING THIS MANUAL
This User Manual is a guide for use during the installation, normal operation and maintenance of a
Synergy or Synergy UV Water Purification System. ‘Synergy’ is used in this manual to refer to either
the Synergy or the Synergy UV unless otherwise noted. It is highly recommended to completely read
this manual and to fully comprehend its contents before attempting normal operation or maintenance
of the Water Purification System.
1-2 SAFETY INFORMATION
Your Synergy System should be operated according to the instructions in this manual. In particular,
the hydraulic and electrical specifications should be followed and met. It is important to use this
equipment as specified in this manual; using this equipment in a different manner may impair the
safety precautions of the Synergy System.
Symbol What it means
This HAZARD
symbol is used to refer to instructions in this manual that
need to be done safely and carefully.
This ATTENTION
symbol is used to refer to instructions in this manual that
need to be done carefully.
This UV RADIATION
sticker is used to refer to a position on the Synergy
System Cabinet or inside of it where exposure to UV light is possible.
This DANGER
sticker is used to refer to a position on the Synergy System
Cabinet or inside of it that could be hazardous.
This ELECTRICAL GROUND
sticker is used to refer to a position on the
Synergy System Cabinet or inside where an electrical ground connection
is made.
This ELECTRICAL DANGER
sticker is used to refer to a position on the
Synergy System Cabinet or inside where an electrical danger could exist.
!
- 1 -