MAINTENANCE
INSTALLING THE NEW UV LAMP
G
H
I
J
Ensure that you use the gloves supplied with
the UV replacement kit. Plug the electrical
cable to the new UV Lamp (G).
Carefully insert the UV Lamp into the UV
housing (H).
Attach the UV housing with the Velcro belt (I).
Install the SynergyPak (J).
Install the Final Filter.
Close the front cover.
Plug the electrical cord to power ON the
system.
Reset the UV Timer. See
Section 6-6 How to
View or Reset the UV Lamp Timer (C03).
- 37 -
To Next Page
Loading...
