For safe use
10
l
Caution regarding moving parts
• Keep parts of the body such as the face and hands away from moving parts. Also keep clothing
(e.g., loose clothing and accessories) that may impede work away from the machine. Failure to
do so may result in injury.
• Long hair should be tied back. Failure to do so may result in injury.
l
Do not disassemble or repair
• Do not attempt to disassemble or repair this machine. Otherwise there is a risk of failure, electric
shock, or fire.
l
Handling the cutter
• Avoid touching the cutter blade. Failure to do so may result in injury.
l
Disposing of this machine
• Please contact your local retailer or service agent.
• When disposing of this machine yourself, contact an industrial waste disposal operator or
dispose of this machine in accordance with local laws and regulations.
l
Heater
• The heater becomes extremely hot. Do not touch with bare hands.
• Condensation may form on the print head nozzle surface depending on the ambient
temperature and humidity. The formation of condensation may cause printing defects (e.g.,
nozzle clogging or deflection). Perform head cleaning if any printing defects (e.g., nozzle
clogging or deflection) occur during printing. Set the platen heater to a temperature not
exceeding 35 °C, and ensure that the ambient temperature is within the permissible operating
temperature range (20 °C to 30 °C).
"Head Cleaning"(P. 60)
"Installation Precautions"(P. 14)
l
Other Usage Precautions
To Next Page
Loading...
