MIMAKI jV100-160 - Ink Handling and Specifications

Ink or any Other Liquid Used with the Machine
12
Ink or any Other Liquid Used with the
Machine
Precaution regarding liquid are indicated on the containers of ink, maintenance liquid, or other liquids used
with this machine. Thoroughly read them and make sure you understand the contents.
• Take steps to prevent leakage into natural water systems or domestic wastewater. Some
constituents are toxic to aquatic life.
• Be sure to read the safety data sheet (SDS) before use.
https://mimaki.com/supply/sds/
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with this machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
• Do not subject Ink cartridge to strong shocks or violent shaking. Do not attempt to refill the ink.
Leaking ink may adhere to the skin or get into your eyes or mouth.
• Do not disassemble Ink cartridge. Leaking ink may adhere to the skin or get into your eyes or
mouth.
• Avoid storing this product in locations accessible to children.
• When disposing of this machine, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
• Do not use ink, maintenance liquid, or other liquids used with this machine with other printers.
Disregarding this precaution may result in damage to the printer.
• Do not touch the metal parts of the ink IC chip. Static electricity may damage the ink IC chip,
and dirt or damage may make the ink IC chip unreadable.
• Store in a low place no higher than 1 m above the floor. Dropping this machine may result in
splashing ink.
• Store in sealed containers.
• Store in a cool and dark place.
(1) Store ink in an environment where it will not freeze. Note that using thawed ink may affect
printing quality due to ink degradation.
(2) When moving ink from cold to warm locations, allow to stand for at least three hours before
use in the same conditions as the machine.
(3) Open the ink before use and use up as quickly as possible. Print quality may degrade if the
bottles are left open for extended periods.