Chapter 1 Before Using This Product
38
1.5 Ink Replacement Method
When Ink Near End is Displayed
Ink levels are low. We recommend replacing with new Ink pack as soon as possible. Printing is still possible,
but cleaning and continuous printing are not possible. Note that ink may run out during printing.
To check which Ink cartridge needs to be replaced, press the [ENTER] key on the LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 29)
When Ink End is Displayed
The ink has run out. Replace with new Ink pack.
Thoroughly read the following and make sure you understand its contents.
"Ink or any Other Liquid Used with the Machine"(P. 12)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with this machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
• The ink in the ink pack cannot be used up completely. The ink pack is filled up with the amount
of ink which is slightly more than the indicated value. As ink end occurs when the indicated
amount of ink is consumed, a small amount of ink remains.
To Next Page
Loading...
