Chapter 4 Maintenance
112
5
Replace the media cutter.
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Mount a new cutter.
(4) Tighten the screw to clamp the cutter.
6
Close the carriage cover hatch, then retighten the screw.
7
Once replacement is complete, close the cover, then press the [ENTER] key.
• When disposing of this machine, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
Waste Ink Tank Replacement
Ink used during head cleaning and other processes is collected in the waste ink tank at the lower right of the
product.
This product keeps track of the waste ink level. A “Check Waste Ink Tank” message appears when the
preset level is reached. Use this a guide for replacing the waste ink tank.
• For a 2-liter tank, the preset level is 80 % (1.6 liters).
• Continuing to use the product without disposing of the waste ink may result in waste ink
overflowing from the waste ink tank. Visually check ink levels in the waste ink tank about once a
week.
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with this machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
To Next Page
Loading...
