MIMAKI jV100-160 - Pinch Rollers and Grid Rollers; Ink Status Lamp

Chapter 1 Before Using This Product
23
Pinch Rollers and Grid Rollers
The pinch rollers and grid rollers are used to grip and feed the media.
Pinch roller
Grit roller
• When this product is not in use, raise the clamp lever to separate the pinch rollers from the grid
rollers. Leaving the pinch rollers in the lowered position for an extended period of time may
cause the pinch rollers to become deformed. Deformation of the pinch rollers may prevent the
media from being fed correctly.
• Attach the clamp changeover sliders to the pinch rollers at the left and right-hand ends of the
media. The pinch rollers can be raised by attaching clamp changeover sliders. This prevents
gripping the left and right-hand ends of the media for consistent feeding.
Clamp changeover
slider
Ink status lamp
You can check the status of the ink by looking at the lamp on the ink supply unit.
Color Status Outline
- Off No error
Blue Illuminated Ink is being supplied (no error)
Yellow Illuminated
Flashing
One of the following errors has occurred: Printing is possible.
• INK NEAR-END
• Ink expired (1 months passed)
1