Chapter 2 Printing
66
3
Select the image data imported.
• The image is displayed in the tab for JV100-160 selected in “Printer name”.
4
Check the settings and alter as necessary.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(normal printing): Specifies settings like enlargement/reduction and number of copies.
(print conditions): Selects a color profile for the media and ink set loaded in this machine.
• For more information, refer to the RasterLink reference guide.
https://mimaki.com/download/software.html
5
Print image data.
• Click (execute) from the function icons on the right-hand side of the screen. Select “Immediate
Print” or “RIP and Print”, then click [Start].
• Media width must be reacquired after replacing media.
(1) Select the tab for JV100-160 in the main window.
(2) Click (display latest printer status) in the Printer tab.
Changing the Origin
The print start position can be altered. Use the LED pointer to set the origin.
• Print origin default value
– Feed (longitudinal, X’) direction: Approx. 75 mm to rear from platen cutting slot
To Next Page
Loading...
