Chapter 4 Maintenance
91
4.2 Maintenance Items and Timing
Timing Item
Periodically Shake the Ink cartridge. "Ink Maintenance"(P. 92)
At the end of the work
week
Clean the wiper and wiper bracket. "Wiper Cleaning"(P. 92)
Clean the cap rubber. "Cap Rubber Cleaning"(P. 94)
Clean the NCU. "NCU Cleaning"(P. 95)
Clean the underside of the carriage. "Carriage Underside Cleaning"(P. 96)
Clean the DAS sensor. "Automatic Correction Sensor (DAS)
Cleaning"(P. 97)
Clean the ink discharge channel. "Ink Discharge Channel Cleaning"(P. 97)
Clean the media sensor. "Media Sensor Cleaning"(P. 98)
Clean the media holder. "Media Holder Cleaning"(P. 99)
Clean the platen. "Platen Cleaning"(P. 99)
Clean the cover (exterior). "Cover (Exterior) Cleaning"(P. 100)
Check the waste ink levels in the waste ink tank. "Replacing the Waste Ink
Tank"(P. 113)
When not used for
more than a week
Clean the wiper and cap and wash the ink discharge channels. After cleaning,
store without turning off the main power supply. "When Not in Use for
Extended Periods"(P. 100)
Items Required for Maintenance
To order replacement consumable items, contact your local dealer or our service office.
Item Code
200 Maintenance Liquid Kit for Solvent Ink SPC-0369
Cleaning Stick for Head Surrounding SPC-0527
Swab 6-axis "S" A101438
BEMCOT M-3 A101437
KIMWIPE S-200 SPA-0207
Maintenance cloth SPC-0574
Safety glasses
Gloves
For more information on other consumable items, refer to our website. https://mimaki.com/supply/inkjet.html
• Avoid storing this product in locations accessible to children.
4
To Next Page
Loading...
