MIMAKI jV100-160 - Ink Specifications

Ink or any Other Liquid Used with the Machine
13
• Printing is disabled if a different ink IC chip is used.
Ink Specifications
Item Details
Type Special solvent ink (MIMAKI product)
Color Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
Light cyan (Lc)
Light magenta (Lm)
Light black (Lk)
Orange (Or)
Form Cartridge
Ink capacity 600 ml
Expiration date As indicated on the ink pack.
However, within three months after opening, even before the expiration
date
Storage
temperature
When stored 10 °C to 35 °C (daily mean temperature)
However, not more than 1 month at 30 °C
• Ink quality may deteriorate if stored outside these conditions.
During
transportation
1 °C to 40 °C
However, not more than 120 hours at 60 °C, and not more than 1 month at
40 °C
• Where possible, avoid storing in cold locations below 0 °C and hot
locations above 40 °C.
• Ink quality may deteriorate if stored outside these conditions.
Restrictions concerning the product
The ink expiration date is indicated on the Ink pack. Expired ink may cause printing defects or alter the color
tone. Printing is possible even if the ink has passed its expiration date. Nevertheless, we recommend
replacing with new ink or using up as quickly as possible.
Example: If the ink expiration date is indicated as April 2021:
• May: Replace with new ink or use up as quickly as possible. Printing is possible.
• June: Replace with new ink or use up as quickly as possible. Printing is possible.
• July: Printing is not possible.
• The message appears on the display.