MIMAKI jV100-160 - Cover (Exterior) Cleaning; When Not in Use for Extended Periods

Chapter 4 Maintenance
100
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
Cover (Exterior) Cleaning
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
When Not in Use for Extended Periods
Clean as follows if the product is not used for one week or longer:
Check beforehand
Is [Near End] or [Ink End] displayed?
• Maintenance liquid and ink is aspirated during the washing operation. Washing is not possible if an
error occurs during this process. Replace with new ink.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Custody Wash], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Clean the wiper and bracket.
• "Wiper Cleaning"(P. 92)
5
Press the [ENTER] key once cleaning is complete.
• “Cap Cleaning Completed (Next)[ENT]” appears on the display.
6
Clean the cap rubber.
• "Cap Rubber Cleaning"(P. 94)
7
Once cleaning is complete, close the cover, then press the [ENTER] key.
• The cap is filled with maintenance liquid.