Chapter 1 Before Using This Product
25
l
Main power supply switch
This is located on the right-hand side of the product.
Main power supply switch
Heater power switch
• Do not turn off the main power supply. Turning off the main power supply will disable the
automatic maintenance function (including nozzle clogging prevention function and ink
discharge channel cleaning function). This will increase the risk of print defects (e.g., nozzle
clogging, deflection).
l
[END/POWER] key
The [END/POWER] key is the key normally used to turn the power on and off.
• Close the front cover and maintenance covers. Leaving any of the covers open will disable the
automatic maintenance function (including nozzle clogging prevention function and ink
discharge channel cleaning function). This will increase the risk of failure or printing defects
(e.g., nozzle clogging or deflection).
1
To Next Page
Loading...
