Chapter 1 Before Using This Product
33
• The PC used to transfer print data must be located on the same network as this product. This product
cannot be connected via a router.
• Use a 1000BASE-T compatible computer or switching hub. Printing requires 1000BASE-T support.
l
Checking the LAN connection
1
Check the display on this product.
• Local guidance can be used for checking. "Displaying Machine Information (Local
Guidance)"(P. 29)
• Printing is not possible if “100Mbps”, “10Mbps”, or “No Connect” is displayed. Event email can be
used. "Event Email Function Settings"(P. 83)
INFORMATION
LAN Status 1000Mbps
2
Check the lamp on the LAN connector.
• The LAN connector lamp illuminates when this machine is running.
Color Status Outline
Green Illuminated Connected via 1000BASE-T
Off Connected via a network other than 1000BASE-T
• 1,000 Mbps is not supported if only the orange lamp is illuminated or
flashing. Check the specifications for the PC, peripheral devices, and
cable.
Orange Illuminated Linked up (connected).
Flashing Data being received
Off Link down (not connected)
1
To Next Page
Loading...
