Chapter 2 Printing
56
Adjusting the Torque Limiter
The take-up unit is fitted with a torque limiter. Turn the torque limiter adjustment nut to adjust take-up
tension. The torque limiter is initially set to “Medium” when shipped.
Adjustment nut
Torque scale 50 % of maximum torque 100 % of maximum torque
l
Increase tension (clockwise)
Increase tension when using with heavy or thick media, such as tarpaulin. Perform adjustments manually.
• Do not use the torque adjustment handle. Overtightening with the torque adjustment handle
may damage the take-up unit.
l
Decrease tension (counterclockwise).
Decrease tension when using lightweight media. Use the “torque adjustment handle” provided.
To Next Page
Loading...
