MIMAKI UJF-3042 MkII - Installing the machine

Chapter 1 Before Use
1-2
Installing the machine
Where to install the machine
Secure sufficient space for installation before assembling
this machine.
Decide the place considering the size of the machine and
a space required for printing.
Moving this machine
Move this machine as follows when this machine is
required to move on the step-free same floor.
 Before moving this machine, install the
handles for transporting. (two places)
Insert the handles into this machine, and fix them
tightening screws.
 For safety, be sure to work it with more than 8
people.
Do not push the cover to move this machine since the
cover may be deformed. Be sure to hold the handles
for transporting when moving the machine.
Model UJF-3042MkII UJF-6042MkII
Width 1,355 mm (53.3 in) 1,665mm (65.6 in)
Depth 1,290mm (50.8 in)
Height * incl. bottles 936 mm (36.9 in)
incl. dedicated stand 1,567 mm (61.7 in)
Total Weight Approx. 135kg(297.6lb) Approx. 150kg(330.7lb)
incl. dedicated stand Approx. 170kg(374.8lb) Approx. 185kg(407.9lb)
• When moving this machine, take care not to give a
significant impact on it.
• When moving this machine, keep it as flatly as
possible. Do not move it on its side. It may cause
machine failure.
• The dedicated stand of this machine includes
leveling feet to secure the machine.
Before turning the power ON, make sure that the
printer body is fixed with the leveling feet.
The printer body may start moving during
operation if it is not fixed with the leveling feet.
200 mm
or more
(7.9 in or
more)
UJF-3042MkII: 1,955 mm or more
( 77.0 in or more )
UJF-6042MkII: 2,265 mm or more
( 89.2 in or more )
2,090mm or more
(82.3 in or more)
400 mm or more
(15.7 in or more)
500 mm or more
(19.7 in or more)
500 mm or more
(19.7 in or more)
Handles for
transporting
Handles for
transporting