MIMAKI UJF-3042 MkII - Operation Panel

1-6
Chapter 1 Before Use
Operation Panel
The operation panel is used for setting of printing method and each operation.
*1 : Ink Status
Status of the ink tank (remaining ink/error, etc.) is displayed using icons. Each icon is described below.
Icon Contents
Displays the remaining ink amount in nine levels, in the order of the ink cartridge set in the slot. The remaining
amount decreases moving to the right.
Indicates that the ink cannot be used due to ink end or ink error.
Indicates that ink has expired or that one month has passed after the expiration date. Please use quickly. Ink can no
longer be used if two months have passed after the expiration date.
LOCAL 10：22
0.0 mm 0.0 mm 53.0 mm
MENU
TEST PRINT /
CLEANING
REMOTE
Lc Lm Y C M K W CL
Status indicator lamp
Indicates the machine’s status (printing, error occurred, etc).
Condition of Lamp Condition of machine
OFF
No print data has been received, and no errors have
occurred.
Lit steady Light blue Switched to Remote mode.
Flashing Light blue
Currently printing.
In test printing: printing a pattern stored inside the
machine.
Lit steady blue The print data has been received.(LOCAL)
Flashing red Error has occurred.
Lit steady red Error (SYSTEM HALT) has occurred.
Display
Displays the following items:
• Printer status
•Ink status
• Functions assigned to [FUNC1] to [FUNC3]
key
Changes over the functions of the
function keys ([FUNC1]–[FUNC3]).
/ / key
Press this to set various functions or
to do test printing. The function
keys’ functions are changed each
time [SEL] key is pressed.
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them to
select an item of printing conditions.
key
Cancels the last input value or returns
the setting menu to the immediate
higher level of the hierarchy. Also, press
this to turn the power on or off. (Give it a
long press to turn the power off.)
key
Registers the last input value as the
setting value or goes to the immediate
lower level of the hierarchy.
• The [ENTER] key under the operation panel lights in blue when the power is turned on, and off when the power switch
is turned off.
• The maintenance process starts automatically even if you turn the power off.( P.4-15)
• Do not turn the main power switch( P.1-4) off.
ink full
Approximately
1/8 consumed
Approximately
1/4 consumed.
Approximately
3/8 consumed.
Approximately
1/2 consumed.
Approximately
5/8 consumed.
Approximately
3/4 consumed.
Approximately
7/8 consumed.
near end