5-3
Chapter 5 Troubleshooting
1
2
2
2
5
Nozzle is clogged
When nozzle missing is not dissolved even after the head
cleaning referring to P.2-8, make sure the following
operations.
Wash the head nozzle by the operations of P.4-
8.
Recovery the nozzle by the operations of P.4-
13.
Ink bottle warning appears
If an ink bottle trouble is detected, a warning message
appears.
None of printing, cleaning and all the other operations that
use ink is available.
If an abnormality occurs, perform the following
procedures:
• Check the ink amount in the ink bottle and if the ink
amount is not enough, add ink.
When the ink leakage occurs
If the ink leakage occurs, unplug the power plug to turn off
the main power switch, and contact our service office or
distributor.
• Once ink tank trouble is displayed, do not leave
the ink bottle without replacing it for a long time;
otherwise, the machine will lose the nozzle
missing prevention function.
If nozzles are clogged, the machine must be
repaired by MIMAKI's service engineer.
To Next Page
Loading...
