MIMAKI UJF-3042 MkII - Basic Operations

This chapter
describes procedures and setting methods for ink and media preparation, and printing.
Operation flow ...............................................2-2
Turning the Power ON/OFF ..........................2-3
Turning the Power ON ................................ 2-3
Turning the Power OFF ............................... 2-3
Setting the media ..........................................2-4
Set the media in another method ................ 2-6
Test printing ..................................................2-7
Perform test printing with the test pattern for
checking white ink ....................................... 2-8
Head Cleaning ..............................................2-8
About head cleaning ................................... 2-8
Perform head cleaning depending on the test
printing result ...............................................2-8
Printing an image from source data ..............2-9
Starting the printing operation ......................2-9
Interruption of printing ..................................2-9
Checking printing data that is being received or
has been received .....................................2-10
When [! WORK High] is displayed .............2-10
If you open the cover during printing .........2-10
Chapter 2
Basic Operations