1-5
Chapter 1 Before Use
1
2
2
2
2
Indicator light unit
The indicator light unit shows the status of the machine in the three colors light.
• Indicator light unit on 3042MkII is optional.
• To your use this option, you will need a mounting work by our service engineers. Please note that the
optional accessories can not be attached by the customer.
status of the machine
State of lamp
Greem Orange Red
LOCAL ---
REMOTE (printing) Blinking - -
REMOTE (no printing) Lighting - -
Specific warning / error
*1
has occurred, and the local state.
*1. It is a warning or error that can be released in the work by the customer. (Such as ink near end, ink end, waste ink tank FULL, wiper cleaning, cap
cleaning, and overflow maintenance)
-Blinking-
Specific warning / error occurred, and printing in the remote. Blinking Blinking -
A specific warning / error occurred, and not printing in the remote. Lighting Blinking -
Errors to cause system down or the occurrence of error such as cover open. - - Lighting
• Never disassemble or remodel the main unit of the printer and the optional indicator. Disassembling/ remodeling any
of them will result in electric shocks or breakdown of the device.
• If the device is used under an abnormal condition where the device produces smoke or unpleasant smell, fire or
electric shocks can result.Be sure to turn off the power switch immediately and detach the plug from the
receptacle.Check first to be sure that the device no longer produces smoke, and contact a distributor in your district
for repair.
• Never repair your device by yourself since it is very dangerous for you to do so.
To Next Page
Loading...
