1-8
Chapter 1 Before Use
About table
It is necessary to adjust the table height depending on the media thickness because various media can be set for
printingprinting.
The specification of each table is as less:
About tap position
The table and the vacuum table on which the media set have the M4 tap (UJF-3042HG: for 33 positions, UJF-6042: for 49
positions) of the size below respectively.
Table
UJF-3042MkII UJF-6042MkII
Acceptable media
weight
*1
*1. If you put a heavier thing than specified, the quality image may be degraded.
5kg and less 8kg and less
Vacuum function No(Option) Yes
Table movable area
0 to 53mm
Media thickness
0 to 153mm (6inch)
(1) Movable area 53mm + (2) 50mm spacers x 2 levels = 100 mm
Table
• UJF-3042MkII
Vacuum Table
To Next Page
Loading...
