MIMAKI UJF-3042 MkII - Setting a LANGUAGE; Setting a Ionizer (Option); Setting a Ionizer(Option); Recognize Connection Options

3-25
Chapter 3 Machine setting
3
2
2
2
Setting a LANGUAGE
You can change the displayed language.
1
Press the (MENU) (>>) key
in LOCAL.
2
Press to select “MACHINE
SETUP”, and press the key.
• MACHINE SETUP MENU will be displayed.
3
Press to select “LANGUAGE” , and
press the key.
4
Press to select language, and
press the key.
• Set Value ：日本語 / English
5
Press the key several times to
end the setting.
Setting a Ionizer (Option)
When the optional ionizer is connected, select ON to
remove static electricity.
For safety instructions and precautions, refer to the
“Instruction Manual for Ionizer” for UJF-3042MkII/
6042MkII.
1
Press the (MENU) (>>) key
in LOCAL.
2
Press to select “MACHINE
SETUP”, and press the key.
• MACHINE SETUP MENU will be displayed.
3
Press to select “Ionizer”, and
press the key.
• The setting of "Ionizer" is selected.
4
Press to select set value, and
press the key.
• If you select "ON," the device moves the table in
order to remove static electricity from all the
printing surfaces according to the printing data
before the printing operation starts.
5
Press the key several times to
end the setting.
Recognize connection options
Recognize the option when installing the Kebab option.
1
Press the (MENU) (>>) key
in LOCAL.
2
Press to select “MACHINE
SETUP”, and press the key.
• MACHINE SETUP MENU will be displayed.
3
Press to select “SET OPTION
JIG”, and press the key.
4
Connect the Kebab MkII option, and press
the key.
• Display the recognized options.
5
Press the key several times to
end the setting.
Initializing the Settings
You can return the setting of “SETUP”, “MAINTENANCE”
and “MACHINE SETUP” to the status before shipment.
1
Press the (MENU) (>>) key
in LOCAL.
2
Press to select “MACHINE
SETUP”, and press the key.
• MACHINE SETUP MENU will be displayed.
3
Press to select “SETUP RESET” ,
and press the key.
4
Press the key.
• The already configured settings are initialized.
5
Press the key several times to
end the setting.
• Displayed only when the Ionizer option is enabled.