This chapter
describes the various setting of this machine.
About Head Height MENU ............................3-2
Head Height MENU table............................ 3-2
Setting the Media Thickness ....................... 3-3
Setting the HEAD GAP ............................... 3-3
Gap check ................................................... 3-3
Table spacer ............................................... 3-3
About ORIGIN SETUP MENU ...................... 3-4
ORIGIN SETUP MENU table ...................... 3-4
Setting the X offset...................................... 3-5
Setting the Y offset...................................... 3-5
Setting the Z origin ...................................... 3-5
Changing the origin using the JOG keys..... 3-5
About SETUP MENU ....................................3-6
SETUP MENU table.................................... 3-7
Setting of Media Correction......................... 3-8
Setting of LOGICAL SEEK.......................... 3-8
Setting of INK LAYERS............................... 3-9
Setting of REFRESH LEVEL....................... 3-9
Setting of UV MODE ................................... 3-9
Setting of WORK CHANGE ........................ 3-9
Setting of FAN MODE ............................... 3-10
Setting of AUTO CLEANING..................... 3-10
Setting of PRINT FLUSHING LEVEL........ 3-10
Setting of MAPS4...................................... 3-11
Setting of the Misregistration adjust .......... 3-12
About MACHINE SETUP MENU .................3-14
MACHINE SETUP MENU table................. 3-15
Setting a AUTO Power-off ......................... 3-16
Setting Time............................................... 3-16
Setting Unit (Temperature/ Length) ........... 3-16
Setting a KEY BUZZER............................. 3-17
Set the network.......................................... 3-17
Setting event mail function......................... 3-18
Setting a LANGUAGE................................ 3-23
Setting a Ionizer(Option)............................ 3-23
Initializing the Settings............................... 3-23
About NOZZLE CHECK MENU ..................3-24
INFORMATION MENU table ..................... 3-24
Printing Check Flow................................... 3-25
Printing Operations at “Nozzle Missing”
Judgment and Error Occurrence ............... 3-25
Setting the Printing Check ......................... 3-26
Setting the NOZZLE RECOVERY ............. 3-26
Setting the Judgement Condition............... 3-26
About INFORMATION MENU .....................3-28
INFORMATION MENU table ..................... 3-28
Displaying the Information ......................... 3-29
Chapter 3
Setup
To Next Page
Loading...
