Using the QC Programs
8-8
Deleting L-J results
To delete the current result, press [DEL] and a message box will pop up, as Figure8-8 shows.
CLCIK “Enter” to confirm the deletion; CLICK “Cancel” to abort the deletion.
Figure8-8 A message box to confirm the deletion
Printing L-J results
Press [PRINT] to print out the current QC result by the printer.
Exiting the “L-J Count” screen
Press [MENU] to exit to the system menu, or press [MAIN] to exit to the “Count” screen.
8.2.3 Reviewing L-J Results
You can review the saved L-J results in either the “L-J Graph” mode or “L-J Table” mode.
“L-J Graph” mode
Entering the “L-J Graph” screen
Press [MENU] to enter the system menu.
Figure8-9 System menu
To Next Page
Loading...
