Using the QC Programs
8-19
Figure8-23 “
X
Count”screen
z Be sure to use the Mindray - specified controls. Using controls other than
the specified will lead to misleading results.
z Refer to the instructions of use of the controls for how to store and use the
controls.
z Samples, controls, calibrators and waste are potentially infectious. Wear
proper personal protective equipment (e.g. gloves, lab coat, etc.) and follow
safe laboratory procedures when handling them in the laboratory.
z The sample probe tip is sharp and may contain biohazardous materials.
Exercise caution to avoid contact with the probe when working around it.
z Do not re-use such disposable product as collection tubes, test tubes,
capillary tubes, etc.
To Next Page
Loading...
