Using the QC Programs
8-42
8.5.2 Setting frequency of the X-B analysis
The X-B analysis is performed on batches of certain number of patient samples. To determine
how many samples are to be included in every batch, follow the steps below to do so.
Entering the “Samples/Batch”screen
Press [MENU] to enter the system menu.
Figure8-51 System menu
SELECT “Quality Control→ X-B Analysis → Samples/Batch” (Figure8-51) to enter the
“Samples/Batch” screen (Figure8-52).
Figure8-52 “Samples/Batch”screen
To Next Page
Loading...
