Using the QC Programs
8-43
Setting Samples/Batch
ENTER the desired number, which should be 20 to 200. 20 is recommended.
Exiting the “Sample/Batch” screen
Press [MENU] to exit to the system menu; press [MAIN] to exit to the “Count” screen.
8.5.3 Enabling/Disabling X-B Analysis
Entering the “Start/Stop”screen
Press [MENU] to enter the system menu.
Figure8-53 System menu
SELECT “Quality Control→ X-B Analysis→ Start/Stop” (Figure8-53) to enter the
“Start/Stop” screen (Figure8-54).
To Next Page
Loading...
