Using the QC Programs
8-44
Figure8-54 Enabling/disabling X-B analysis
Random samples are required for the X-B analysis. In case of known samples of a particular
type (oncology, neonatal and so forth) that will seriously interfere with the X-B results, disable
the X-B analysis.
Enabling/disabling X-B analysis
Press [PgUp] or [PgDn] to activate/deactivate X-B analysis.
Exiting the ”Limit” screen
Press [MENU] (or [MAIN] if you want to go directly to the “Count” screen) to exit the “Limit”
screen and a message box will pop up to remind you to save the changes, as Figure8-55
shows. CLICK
“Enter” to save the changes and exit to the system menu (or the “Count”
screen); CLICK “Cancel” to abort the changes and exit to the system menu (or the “Count”
screen).
Figure8-55 A message box to confirm the changes
To Next Page
Loading...
