Mindray BeneVision N Series

BeneVision N Series Patient Monitor Operator’s Manual 2 - 7
2.3.3 N17, N15, N12, N12C Main Unit
The main unit displays and saves data from modules.
2.3.3.1 N17, N15, N12, N12C Front View
(1) Alarm lamp:
When a physiological alarm or technical alarm occurs, this lamp lights and flashes corresponding
with the alarm priority:
◆ High priority alarms: the lamp quickly flashes red.
◆ Medium priority alarms: the lamp slowly flashes yellow.
◆ Low priority alarms: the lamp lights in cyan without flashing.
(2) Display
(3) Battery indicator:
◆ Yellow: the battery is being charged.
◆ Green: the battery is fully charged.
◆ Flashing green: the monitor operates on battery power.
◆ Off: no battery is installed, or the monitor is powered off and no AC power is connected.
(4) AC power indicator
◆ On: when AC power is connected.
◆ Off: when AC power is not connected.
(5) Power switch
◆ Pressing this switch turns on the monitor.
◆ When the monitor is on, pressing and holding this switch turns off the monitor.
(5)
(4)
(3)
(2)
(1)