Safety Precautions 1-5
Do not expose the system to excessive vibration (during the
transportation) to avoid device dropping, collision, or
mechanical damage.
Please install the system on a flat plane with the four casters
locked. Otherwise, damage may be resulted by accidental
moving.
Pay extra attention when moving the system on a sloping
ground, do not move it on a more than 10°-sloped plane to avoid
system toppling.
Move the system ONLY WHEN the system is shut down or in
standby status, otherwise the system hardware disk may be
damaged.
1.3.3 Personnel Safety
The user is not allowed to open the covers and panel of the system, neither
device disassemble is allowed.
To ensure the system performance and safety, only Mindray engineers or
engineers authorized by Mindray can perform maintenance.
Only technical professionals from Mindray or engineers authorized by Mindray
after training can perform maintenance.
1.3.4 Other
For detailed operation and other information about the ultrasound system, please
refer to the operator’s manual.