4 Setup
Operator’s Manual 4 - 39
MedTouch Preset
You can set environment for MedTouch here and then use the MedTouch function by mobile phone
or tablet computers. See MedTouch manual for details.
4.6.5 Wireless Network Connection
Wireless App Select
Select to enable WPS, X-Link, WLAN, Hotspot.
Hotspot
When enable Hotspot in Wireless App Select, hotspot can be set.
MIOT Preset
After the MIOT (Mindray Internet of Things) service is enabled and configured, the Ultrasound
device information such as Usage, Operating duration, can be transmitted to MIOT.
Device Manager
4.6.6 Route Settings
The system can be set to connect to the local network and internet network through route settings at
the same time. For details, please contact the service engineers.
4.6.7 X-Link
Before presetting X-Link, you should enable X-Link in Wireless App Select page.
Item Description
SSID The SSID of hotspot.
Password The password to connect hotspot equipment.
Item Description
IP Address IP address of the MIOT service device.
Port Port for transmitting.
MIOT Service Switch
On
Tap to enable MIOT service.
Item Description
Permission Tap to enable Device Management permission and agree to the clause.
Then the device information will be uploaded to UltraSync device
management platform.
Department Enter the department information of the device.
Type Item Description
X-Link / Select to enable X-Link function.
To Next Page
Loading...
