2 - 8 Operator’s Manual
2 System Overview
2.7 Introduction of Each Unit
Figure 2-1 Overview of main unit
No. Name Function
1. Probe holder Used for placing the probe.
2. Speaker Outputs the audio.
3. Power button/Power
indicator
Used for turning on/ off the power.
The indicator lights up when the system is powered on.
4. Power output Provided a power interface for the peripheral devices.
NOTE:
The auxiliary power output socket of the peripheral
equipment provided by the main unit connects the power
supply of the optional peripheral equipment. Do not
connect any other equipment to this interface; otherwise,
the system may fail because the rated output power is
exceeded.
5. Equipotential terminal Equipotential connection is used to balance the protective
earth potential between the equipment and other electrical
equipment.
6. Caster Used to fix or move the device.
1
2
3
4
5
6
8
7
9
10
12
13
14
15
17
11
16
To Next Page
Loading...
