Mindray Eagus TEX21 - Micturition Volume Calculation

6 - 46 Operator’s Manual
6 Image Acquisition
6.24.2 Micturition Volume Calculation
Th
e micturition volume can be calculated by subtracting the measurement results before
micturition from the measurement results after micturition.
Perform the following procedure:
1. After entering the [Smart Bladde
r] function, tap [Pre/Post] in the tab to enable the function.
2. Select [Pre-BL] and measure the volume of the urine in the bladder before micturition. The
result name will contain "Pre-BL".
3. Select [Post-BL] and measure the volume of the urine in the bladder after micturition. The
result name will contain "Post-BL"
The micturition volume is displayed after two measurements are performed.