4 - 14 Operator’s Manual
4 Setup
4.1.10 Scan Code Preset
Set the code parameters for barcode reader.
1-dimension barcode reader (1D)
Member of filter/Privilege • Enter the member name, and select or deselect privileges from the
drop-down list of “Privilege”.
• Tap [Add], and the new members and privileges will appear in the
Member of filter list.
• Select a member to be deleted, and tap [Delete].
• Select a member to be modified, modify the member name, and
select or deselect privileges from the drop-down list of
“Privilege”. Tap [Modify], and the modified member name and
privileges will appear in the Member of filter list.
Item Description
Item Description
Scan Item After scanning 1D bar code, the regular expression is matched in the priority
order: “Patient ID > Other ID > First name > Last name > Middle name >
Accession# > Operator > Diagnostician”. If the regular expression is
matched successfully, the data of 1D bar code will be displayed in this item
in Patient page automatically.
Example: The data of the bar code is 123 after scanning 1D bar code. The
regular expression is matched in the priority order: “Patient ID > Other ID >
First name > Last name > Middle name > Accession# > Operator >
Diagnostician”. If the regular expression of “Other ID” is matched
successfully, “123” will be displayed in “Other ID” item in Patient page
automatically.
Regular
Expression
Set the regular expression according to the bar code format.
Move Up/Down Move up or Move down a selected item.
Add/Delete Add or delete a selected item. (Only the default item can be added or
deleted.)
Load default Restore the parameter value to the default value.
Append Options The information of operator or diagnostician can be appended after selecting
the check box.
For example, after scanning a 1D barcode of an operator or diagnostician, the
obtained data is A, and A will be displayed in “Operator” or “Diagnostician”
item in Patient page automatically.
After scanning a 1D barcode of an operator or diagnostician for a second
time, the obtained data is B, and A will be appended by B in “Operator” or
“Diagnostician” item in Patient page automatically.
To Next Page
Loading...
